yl23455永利(CHINA)有限公司官网

师资队伍

首页 - 师资队伍 - 教师名录 - 单位列表 - 仪器科学与技术系 - 正文

冯搏副教授

电　　话

邮　　箱bofeng@hust.edu.cn

办公地点机械大楼东楼C609

个人主页

个人简介

       冯搏（Feng Bo, Associate Professor），副教授，博士生导师。2011获北京师范大学物理学学士学位，2016年获华中科技大学测试计量技术及仪器博士学位，2016至2019年在里斯本大学从事博士后研究工作，2019年10月入职华中科技大学机械学院。兼任中国机械工程学会无损检测分会委员、无损检测团体标委会理事、IEEE Senior Member、IEEE IMS无损检测技术委员会(TC-1)委员等。担任3个SCI期刊客座编辑，20余个SCI期刊审稿人。
       主要研究方向为电磁无损检测、超声无损检测、智能传感技术与仪器、数字信号处理算法等，在高速漏磁/动生涡流/电磁超声检测和复合材料结构健康监测方面开展大量研究。主持国基金青年、面上项目各1项，在IEEE TIM, IEEE SJ, NDT&E Int., MSSP等期刊上发表SCI论文50余篇，谷歌学术H因子16。
       主持《误差理论与数据处理》教研项目1项，合著出版《测试系统与信号处理》英文版教材2部，并上线网课教学视频，主编无损检测学会二级证培训教材《钢管自动化漏磁检测培训教材》。

研究方向

电磁无损检测
超声无损检测
智能传感技术与仪器
数字信号处理算法

开设课程

本科生课程：《传感器技术》《误差理论与数据处理》
研究生课程：《仪器智能》
留学生课程：《无损检测》《工程测试技术》

科研项目

[1] 国家自然科学基金面上项目，钢轨电磁超声高速巡检中的动生涡流影响机理及多物理场调控方法，项目负责人。
[2] 国家自然科学基金青年项目，基于线性调频兰姆波的碳纤维板低速冲击分层损伤监测与重构，项目负责人。
[3] 企业横向，基于载带激励的柔性电磁传感方法与应用技术，项目负责人。
[4] 企业横向，钢管表面脸谱检测系统软件开发，项目负责人。
[5] 开放基金，基于交流通电激励的闸门启闭机活塞杆表面缺陷无损检测方法，项目负责人。
[6] 开放基金，手撕金属带动生涡流检测机理与系统研究，项目负责人。
[7] 开放基金，基于动生涡流的速度传感方法与系统，项目负责人。
[8] 国家自然科学基金重大科研仪器研制项目，多功能超声波锂离子电池综合分析仪，参与。
[9] 国家自然科学基金面上项目，高速漏磁检测的磁后效及其作用机理研究，参与。
[10] 国家自然科学基金面上项目，基于主动磁源场耦合的在役钢丝绳大提离漏磁检测方法，参与。

论文专著与专利

论文详见：
https://www.researchgate.net/profile/Bo-Feng-12
https://scholar.google.com/citations?user=Kc7y0VIAAAAJ&hl=en
代表性论著：
[1] Yiru Xiao, Bo Feng*, et al. Effect of excitation frequency on motion-induced eddy current and speed measurement. IEEE Sensors Journal, 2025;25:6151–9. 

[2] Bo Feng*, Shuangnan Xie, Lian Xie, Kangxuan Deng, Shenghan Wang and Yihua Kang. Analysis of the lift-off effect in motion-induced eddy current testing based on semi-analytical model. IEEE Transactions on Instrumentation and Measurement, 2024, 73: 6002008.

[3] Shenghan Wang, Yu Hu, Zhaoqi Duan, Chun Jiang, Yihua Kang, Bo Feng*. AC Magnetic Flux Leakage Testing with Real-Time Liftoff Compensation Using Double Layer Parallel-Cable Probe. IEEE Transactions on Instrumentation and Measurement, 2024, 74: 6002309. 

[4] Shukai Chen, Minghao Zhang, Ke Huang, Genghao Jiao,Yihua Kang, Bo Feng*. Magnetic and microstructural characterization of carburized HP alloy. IEEE Magnetics Letters, 2024.

[5] Bo Feng*, Kangxuan Deng, Lian Xie, Shuangnan Xie, and Yihua Kang. Speed measurement method for moving conductors based on motion-induced eddy current. IEEE Transactions on Instrumentation and Measurement, 2023, 72: 6005608. 

[6] Bo Feng*, Si Chen, Kangxuan Deng and Yihua Kang. Localization of low-velocity impact in CFRP plate using time-frequency features of guided wave and convolutional neural network. Wave Motion, 2023, 119: 103127.

[7] Yanting Chen, Bo Feng*, Yihua Kang, Xiang Cai, Shenghan Wang, Yannong Li, Zhaoqi Duan. Automatic Crack Identification Using a Novel 3D Profilometry-Based Magnetic Particle Testing Method. Mechanical Systems and Signal Processing, 2023, 202: 110720. 

[8] Rongbiao Wang, Yihua Kang, Jian Tang, Wei Zhao, Bo Feng*, Kai Song. Analysis of the Mechanism of Leakage Magnetic Field Generated by Internal Defects. Journal of Nondestructive Evaluation, 2023, 42: 31.

[9] Bo Feng, Jianbo Wu*, Hongming Tu, Jian Tang and Yihua Kang. A Review of Magnetic Flux Leakage Nondestructive Testing. Materials, 2022, 15: 7362. 

[10] Bo Feng*, Kangxuan Deng, Shenghan Wang, Shukai Chen and Yihua Kang. Theoretical Analysis on the Distribution of Eddy Current in Motion-Induced Eddy Current Testing and High-Speed MFL Testing. Journal of Nondestructive Evaluation, 2022, 41: 59. 

[11] Bo Feng*, Artur Lopes Ribeiro, Dario J. Pasadas and Helena Geirinhas Ramos. Locating low velocity impacts on a composite plate using multi-frequency image fusion and artificial neural network. Journal of Nondestructive Evaluation, 2022, 41(2): 34. 

[12] Shenghan Wang, Bo Feng*, Gongzhe Qiu, Yu Hu, Chun Jiang and Yihua Kang. AC-MFL testing of orthogonal cracks detection of square billet based on the flexible-printed parallel cable magnetizer. Sensors and Actuators A: Physical, 2022, 347(1): 113897.

[13] Yanting Chen, Bo Feng*, Yihua Kang, BoCheng Liu, Shenghan Wang, Zhaoqi Duan. A Novel Thermography-Based Dry Magnetic Particle Testing Method. IEEE Transactions on Instrumentation and Measurement, 2022, 71: 9505309. 

[14] Gongzhe Qiu, Yihua Kang, Shenghan Wang, Si Cheng and Bo Feng*. A novel permeability perturbation testing method for delaminations in steel plates. Nondestructive Testing and Evaluation, 2022, 37(4):427-438. 

[15] Bo Feng*, Weixi Chen, Satoshi Ito, Noritaka Yusa, Hidetoshi Hashizume, Artur L. Ribeiro and Helena G. Ramos. Quantitative evaluation of the delamination length in mechanical lap joints of high-temperature superconducting tapes using Lamb waves. Measurement, 2020, 156: 107606. 

[16] Bo Feng, Dario J. Pasadas, Artur L. Ribeiro, Helena G. Ramos*. Locating Defects in Anisotropic CFRP Plates Using ToF-Based Probability Matrix and Neural Networks. IEEE Transactions on Instrumentation and Measurement, 2019, 68(5): 1252-1260. 

[17] Bo Feng, Yihua Kang, Yanhua Sun*, Zhiyang Deng. Magnetization time lag caused by eddy currents and its influence on high-speed MFL testing. Research in Nondestructive Evaluation, 2019, 30(4): 189-204. 

[18] Bo Feng, Artur Lopes Ribeiro, Helena Geirinhas Ramos*. A new method to detect delamination in composites using chirp-excited Lamb wave and wavelet analysis. NDT and E International, 2018, 100: 64–73.

[19] Bo Feng, Artur L. Ribeiro, Tiago J. Rocha, Helena G. Ramos*. Comparison of Inspecting Non-Ferromagnetic and Ferromagnetic Metals Using Velocity Induced Eddy Current Probe. Sensors, 2018, 18(10), 3199. 

[20] Bo Feng*, Artur Lopes Ribeiro, Helena Geirinhas Ramos. Interaction of Lamb waves with the edges of a delamination in CFRP composites and a reference-free localization method for delamination. Measurement, 2018, 122: 424-431.

荣誉获奖

武汉英才-优秀青年人才
华中科技大学教师教学竞赛二等奖
优秀教师班主任

师资队伍

冯搏副教授

个人简介

研究方向

开设课程

科研项目

论文专著与专利

荣誉获奖

友情链接

关注我们

师资队伍

冯搏 副教授

个人简介

研究方向

开设课程

科研项目

论文专著与专利

荣誉获奖

友情链接

关注我们

冯搏副教授